910 Power Propelled Drum Racker

Specification:

  • Power-Propelled Drum Handler
  • Familiar controls for power and steering, plus Raise and Lower buttons
    • Adjust travel speed with ergonomic twist grip
    • Tilt the control handle to actuate brake, and feather for accurate payload positioning
  • Set leg straddle from 38″ to 50″ (96.5 to 127 cm) in 4″ (10.16 cm) increments
  • Internal 24V battery plugs into standard 110V AC outlet to fully charge in about 8 hours
  • Built-in Safety Systems
    • Released handle returns to upright and applies “dead-man” brake
    • “Belly-button” switch helps prevent operator being pinned. Upon contact, it activates low speed reverse direction.

Enquire About This Equipment

This field is for validation purposes and should be left unchanged.

Move drums on and off racks, pallets, trucks and position them in a rack with virtually zero clearance in between.

Lift, Transport and Rack a drum in horizontal position up to 10.5′ (3.2 m) high or lift upright drums and place them in a horizontal position.

The lifter Lift Safe supplied is excellent, both operators of the laying machine have said its works perfectly and saves a lot of heavy lifting sometimes with 2 people, as you will see from the photos the roll needs to be lifted to almost head height so previously it was a struggle, however with your lifter the job is much easier and safer now.

Mike Greer. Manager. AMR Textiles