The OMNIA series is a heavy duty counterbalance crane with a capacity of 2.000 kg available in 2 versions:
OMNIA 2TL – PROPORTIONAL LEVER CONTROLS
OMNIA 2TR – PROPORTIONAL REMOTE CONTROL
The OMNIA is equipped with a triple electric boom that reaches a free overhang of over 3 meters
One of the key features of this pick and carry crane is that there are no lateral outriggers, therefore this crane grants max mobility with suspended load.
The OMNIA heavy duty counterbalance crane is the ideal crane for lifting heavy and bulky loads and thanks to its extreme maneuverability it can reach any location where the load has to be picked up, including narrow aisles and tunnels. This heavy duty counterbalance crane has an excellent steering angle that allows it to move along the narrow spaces or rotate on its axis in limited spaces. It is equipped with AGM batteries that can be recharged in areas with limited ventilation.
OMNIA is a full electric crane that can be used in all sectors being silent, environmentally friendly and zero-emission. In line with Health and Safety international standards (emergency buttons, warning devices, relief and check valves).
It is equipped with a maximum load dynamic throttling device , which prevents the crane from loading beyond maximum range at each point of the slide by inhibiting the ascent and feed controls until the operator re-enter the load within the permitted limits.
It can be equipped with any type of under hook accessory (vacuum lifter, bars, beans, clamps, tilters, permanent magnets and customised solutions) for unlimited applications in a large variety of industries.
OMNIA 2TL is equipped with proportional control levers with adjustable speed. It is equipped with proportional control levers as follows:
Lever that controls the jib upward/downward motion
Lever that controls the jib extension & retraction
OMNIA 2TR is equipped with remote control with proportional and adjustable speed . The remote control handle is equipped with buttons, that allows you to activate the proportional control mode.
Button that controls the jib upward/downward motion
Button that controls the jib extension & retraction